Wednesday 21 March 2012

Benefits of PVDC over PVC as a primary packaging material

PVC(Polyvinyl chloride) and PVDC(polyvinylidine chloride)are used in pharmaceuticals as primary packaging materials,which protect pharmaceutical product against Oxygen and odour permeation,moisture and water vapour transmission and microbial attack.

PVC forming film is called rigid PVC because it is almost free of softening agents and plasticizer. Without plasticizers, PVC blisters offer structural rigidity and physical protection for the pharmaceutical dosage form. The blister cavity must remain accessible by the push-through effect and the formed web may not be too hard to collapse when pressed upon. That is why, PVC sheet thickness is typically chosen between 200µ to 300µ depending on the cavity size and shape.

Rigid PVC is a very clear, stiff material with a low WVTR. It exhibits excellent thermoformability; a high flexural strength; good chemical resistance; low permeability to oils, fats, and flavoring ingredients; easy tintability; and low cost. These properties make rigid PVC the material of choice for blister packaging, and it essentially has 100% of the market for the plastic component. PVC films that are thermoformed have a thickness of about 10 mil. The main disadvantages are the poor barrier against moisture ingress and oxygen ingress; moreover PVC has a negative environmental connotation due to its chlorine content and highly toxic dioxins.

Most PVC sheets for pharmaceutical blisters are 250µ or 0.250 mm in thickness. Typical values for the Water Vapor Transmission Rate (WVTR) of a 250µ PVC film are around 3.0 g/m2/day measured at 38°C/90%RH and the Oxygen Transmission Rate (OTR) is around 20 cc/m2/day. In order to overcome the lack of barrier properties of PVC film, it can be coated with PVDC or laminated to PCTFE or COC to increase the protective properties. Multi-layer blister films based on PVC are often used for pharmaceutical blister packaging, whereby the PVC serves as the thermoformable backbone of the structure. PVC layer can be colored with pigments and/or UV filters.

Polyvinylidene chloride (PVDC)–coated PVC. PVDC plays a critical role in blister packaging as laminations or coatings on PVC. PVDC can reduce the gas and moisture permeability of PVC blister packages by a factor of 5–10. Coated PVC films have a thickness of 8–10 mil; the thickness of the PVDC coat amounts to 1–2 mil. The coating is applied on one side and usually faces the product and the lidding material.

PVDC provide excellent barrier to both oxygen and water vapor while most other barrier polymer offer just one or the other. The gas barrier properties are unaffected by relative humidity, do the performance can be relied on through a wide range of packaging and environmental conditions. All PVDC products on the market are actually copolymers of vinylidene chloride (VDC) and other comonomers. The relative amount of VDC in the copolymer dictates some key properties. With more VDC, the barrier properties are generally better, with less VDC, flexibility usually improves. However, the amount and type of comonomer as well as other additives and processing technology used, will influence other properties such as sealing, surface properties, transparency, glossm coefficient or friction, etc. PVDC coatings have been used with duplex (PVDC/PVC) and triplex (PVDC/PE/PVC) structure being the most common ones used. Approximately, 67% of the barrier blister packaging market uses these PVDC-coated films. Typical coating weights used include 40, 60, 90 and 120g/m2, with the WVTR for a ty pical 120 g/m2 PVDC-coated PVC film being arounf 0.16 g/m2 at 40 oC and 75% RH.






47 comments:

  1. These are good inspirations about PVC Sheets, thanks for sharing. It is greatly impressed on the post you have written. This post is a big help for me.

    ReplyDelete
  2. Thermoforming film at Alter Pack Company Alter Pack ltd. is professional distributor of packaging machinery and equipment. Our main sales direction is Thermoforming Vacuum Packaging and Thermoforming packaging at Alter Pack



    ReplyDelete
  3. Nice and very inspiring post here. Thanks for sharing this post. Pepsi machine manufacturer

    ReplyDelete
  4. Genuinely loved this kind of post. Although I want much more information on like precious subject matter.

    Micro Filtration | Ultra Filtration

    ReplyDelete
  5. Chamari Gunathilaka

    Can you know how to check whether there is a PVDC layer on PVC or not?

    ReplyDelete
    Replies
    1. by morpholine test, if you apply morpholine(few Drop) on the film, the PVDC side will strat brounish after few seconds of application

      Delete
    2. CAN I USE ONLY PVDC NOT PVC?PLEASE ANSWER ..IS PVDC IS COSTLIER ?

      Delete
    3. In contact with Morphilin solution pvdc foil colour turns into yellow

      Delete
    4. Pls tells us what is chemical reaction with morphilin turn in yellow colour...thanks

      Delete
  6. HI,
    could you please to tell me which one is contacted with Aluminium foil? PVC or PVDC? Thank you

    ReplyDelete
  7. I have been reading your posts regularly. I need to say that you are doing a fantastic job. Please keep up the great work.
    BLISTER PACKAGING MACHINES MANUFACTURER

    ReplyDelete
  8. We called the film thickness which is less than 1um film, the film thickness is higher than 1um thick film coating process is called with different materials on the
    substrate surface to form a new surface method.
    It requires to have a very film thickness adhesion, adhesion is not strong is called coverage.
    We can see more: film thickness

    ReplyDelete
  9. PVC sheets are highly lit with sunlight, even those areas with large temperature variances during the day or from season-to-season can benefit from these properties.
    Polycarbonate Multiwall Sheets in India|Polycarbonate Greenhouse Panels in India

    ReplyDelete
  10. Good information illustrate, which help to gettong up to date with primary packaging material for pharmaceutical

    ReplyDelete
  11. Good information. I would to ask a question to all. In this blog it is mentioned that PVDc coated side in touch with product and sealing side, but in all pharmaceutical industry following to keep pvdc coated side on the outer side of blister. Can anybody tell about this thing ??

    ReplyDelete
  12. Pvdc coating is the increase high barrier properties in flexible packaging film .

    ReplyDelete
  13. JUST NOW I READ THE ARTICLE, PVDC COATED SIDE SHOULD COME OUT SIDE ONLY, NOT INSIDE.
    THAT IS WHY FILM SUPPLIER ALWAYS MARK AS " COATED SIDE ".

    ReplyDelete
  14. Plasbox can supply you with most of your packaging needs because Plasbox can supply cardboard packaging, plastic packaging, custom packaging boxes
    , shelf ready trays, slitting of rolls of plastic, sheeting of plastic, vacuum forming products manufacturer and thermo formed packaging for many different needs.

    ReplyDelete
  15. PVC-PVDC, PVDC or PVC should contact with product (tablet) and why?

    ReplyDelete
  16. is there any effect on drugs? or due thickness of PVDC, direction of pvdc is defined?

    ReplyDelete
  17. Thanks for the explanation!
    To measure coating thickness, you could also use Elcometer

    ReplyDelete
  18. This blog aware me about different programs which can become very useful for our friends and kids. Few websites provide combined courses and few of the are separately for single subject. Glad to get this information.
    Custom Tea boxes

    ReplyDelete
  19. Can PVDC coated PVC film be recycled?

    ReplyDelete
  20. How we can differentiate PVC from PVDC visually???
    How we can identify visually wheather the pack is duplex or triplex??

    ReplyDelete
  21. This is really nice to read content of this blog. A is very extensive and vast knowledgeable platform has been given by this blog. I really appreciate this blog to has such kind of educational knowledge.
    Conveyors & Handling Systems

    ReplyDelete
  22. can we use one film like i want to use pvdc only for my product packaging .can it be possible

    ReplyDelete
  23. any analysis on PVC, bends after thermoforming, whether there are any other method to cool the material after thermoforming so that bend will not occur?

    ReplyDelete

  24. Thanks for sharing such amazing information.i hope you keep on sharing such kind of useful information daily.We are providing high quality Pharmaceutical Packaging, Pharma Powder & Liquid Packing, Pharma Contract Manufacturing in Hyderabad, Raipur, Ahmedabad & Delhi.

    ReplyDelete
  25. Kindly suggest me the validated methods so that grammage of PVDC layer can be determined in PVDC coated PVC film which are used for packaging of pharmaceuticals after forming blister?

    ReplyDelete
  26. Easy and quick service. Great quality boxes all with handles custom donut boxes. Would recommend

    ReplyDelete
  27. Sjovt lille sted i Kødbyens spisemekka. Hyggeligt sted med Indian restaurant høflig betjening dig med en boss der står og skuler lidt ud over stedet. Dejlig og velsmagende Indian food og ikke for stærkt mad. Chicken Masala og lamme ret var gode.

    ReplyDelete
  28. According to Value Market Research, the latest technology trends and global market opportunity analysis in the High Barrier Packaging Films Market industry growing with a high CAGR in the upcoming year. Our report has categorized the market based on technology, service, development, vertical and region. https://www.valuemarketresearch.com/report/high-barrier-packaging-films-market

    ReplyDelete
  29. Nice post. I am happy after reading the post that you have posted on this blog. Thanks for sharing a wonderful post and hoping to post more.
    What are the Most Important Benefits of CBD or Cannabidiol

    ReplyDelete
  30. nice post .for more  information about packaging solutions and packaging boxes read our blog 

    ReplyDelete
  31. According to Value Market Research, the latest technology trends and global market opportunity analysis in the Pharmaceutical Blister Packaging Market industry growing with a high CAGR in the upcoming year. Our report has categorized the market based on technology, service, development, vertical and region. https://www.valuemarketresearch.com/report/pharmaceutical-blister-packaging-market

    ReplyDelete
  32. I appreciate your post thanks for the information. Some products require special packaging solutions that keep their worth and value intact. Custom Gable Boxes Packaging are the best example of it.

    ReplyDelete

  33. Adults and kids Online Quran classes require explicit consideration to make them perfect, informed, and productive.

    learn quran online

    online quran classes for kids

    ReplyDelete
  34. Great article! I agree on nearly every aspect of this information you have written. Food Packaging Films

    ReplyDelete
  35. Whatever the type of business you have, you can purchase every type of boxes even the i need packaging for my product
    by contact with the Sky Group of Companies that is UK based enterprises and have been working for ten years.

    ReplyDelete
  36. I suppose if I had to pick a perfect article, it would be yours. I know no article is perfect, but yours is as close as it gets. Good job. As keeping the bath bombs away from moisture is essential, Personalized CBD Bath Bomb Boxes ensure that your product is safe from moisture.

    ReplyDelete
  37. I just read your blog post and really enjoyed it! You shared some great insights and I learned a lot. I especially liked your emphasis on the importance of communication and collaboration in the workplace. Great job!
    Marijuana packaging
    baggies for weed
    child proof cannabis packaging


    ReplyDelete
  38. I feel for writers and the work they have to do for quality writing.  You have obviously done a lot of work on this.  Your writing style makes this interesting. Fastest Turn around time for Medicine Packaging Boxes with Environmental and quality check, we can print any size and type of Boxes.

    ReplyDelete
  39. Really very happy to say, your post is very interesting to read. Custom packaging in Adelanto is now designed precisely to fit your product, as opposed to choosing a pre-made one that the items may fit into. Production custom thermoforming near me is a process that entails heating a rigid, two-dimensional thermoplastic sheet rigid, two-dimensional thermoplastic sheets and moulding it into a three-dimensional object under pressure or vacuum. The chocolate shell is easy to remove for assembly thanks to the flexible silicone mould. You are not required to temper sufficient hot chocolate bomb molds Canada because Hot Cocoa Bomb Molds is here to help you out.

    ReplyDelete